Featuring Avant Guard AG 1051 PPC. The thickness of film with the gloss of a coating. Protect your vehicle from Houston road debris and Texas sun for up to 10 years without the high cost of full PPF.
Unlike ceramic, AG 1051 is layered (2–4x) in high-impact areas to provide rock-chip resistance approaching PPF levels.
While standard coatings are ~1 micron, AG 1051 builds to 8–13 microns of armor.
You get the self-healing and impact protection of film with the extreme slickness and depth of a high-end coating.
We start with a multi-stage chemical decontamination. Using professional iron removers and a clay bar, we strip the paint of all "bonded" contaminants. For PPF, the surface must be clinically sterile to ensure no silvering or bubbles occur under the film.
Before the film is laid, we use digital gauges to verify the clear coat health. This ensures the factory finish is structurally sound for the high-tack adhesive of the film, guaranteeing that the "Invisible Shield" bonds perfectly without risk to the underlying paint.
We don't "cut on the car" like amateur installers. We use advanced plotting software to cut film templates specifically for your vehicle's year, make, and model. This ensures a 100% precise fit around emblems, sensors, and vents with zero risk of blade-to-paint contact.
Our technicians use a custom-balanced slip solution to position the film and high-tack activators for the edges. We utilize specialized squeegee techniques to evacuate all moisture, ensuring an optically clear finish with no "orange peel" or distortion.
The hallmark of a premier install is the invisible edge. We "wrap" the film around the panels wherever possible and use controlled heat-gun sets to seal the edges. This prevents lifting and ensures dirt and pressure washers can't get under the film.
Houston is a "high-wear" environment for automotive paint. The humidity acts as a magnet for industrial fallout from the Port and local refineries, while the 100°F+ heat literally bakes contaminants into your clear coat.
If you leave your car unprotected, the Texas sun accelerates oxidation and "chalking." Our Avant Guard AG 1051 doesn't just look better; it creates a non-porous, high-density barrier at a microscopic level. This makes your car significantly easier to clean and makes it nearly impossible for Houston’s grime, bird droppings, and acid rain to stick to your finish.
At LV Fresh Details, we utilize a specialized arsenal of professional-grade protection technology to permanently safeguard your vehicle’s finish directly at your location.
By employing Avant Guard AG 1051, we provide a resin-based armor that is 10x thicker than traditional ceramic coatings. This technical approach is finalized under high-CRI Scangrip LED lighting to ensure a flawless bond. For those seeking the pinnacle of defense, our layering technique in high-impact areas (front bumpers and hoods) provides a "sacrificial layer" that outperforms traditional mobile detailing and mimics the impact resistance of film, delivering a showroom-quality mirror finish that stands up to the Houston elements.
2 Days
Starting at $2500
Professional paint protection is a multi-day precision process that prioritizes quality over speed. Unlike a standard detail, the installation of Paint Protection Film (PPF) or AG 1051 PPC requires a "clean-room" environment and specific curing windows to ensure the adhesive or resin bonds permanently to your clear coat.
From the initial surgical decontamination to the final heat-setting of edges, we do not cut corners. Pricing for our protection packages is determined by the specific coverage you choose (Partial Front, Full Front, or Full Body) and the complexity of your vehicle's body lines. We provide transparent, upfront quotes tailored to your vehicle's needs, ensuring your investment is protected by a long-term warranty and flawless execution.
The absolute best time to protect your paint is the day you take delivery. Applying PPF or AG 1051 to a brand-new surface ensures you are locking in a flawless factory finish and preventing damage before it even starts.
If you drive I-10, 610, or the Beltway daily, your car is a target for high-velocity road debris. This service is for drivers who want to stop rock chips, pitting, and road salt from devaluing their vehicle.
EV paint is notoriously thin and prone to "soft" chipping. We specialize in specialized protection packages for Teslas and high-end electric vehicles that need an extra layer of armor to maintain their sleek, aerodynamic finish.
A vehicle protected by PPF or a 10-year PPC commands a much higher resale value. You aren't just buying a coating; you are preserving the "equity" in your vehicle’s aesthetic condition.
A vehicle protected by PPF or a 10-year PPC commands a much higher resale value. You aren't just buying a coating; you are preserving the "equity" in your vehicle’s aesthetic condition.
1.
Ceramic coatings are a liquid layer of protection that provides gloss and chemical resistance. Paint Protection Film (PPF) is a physical, high-impact urethane film (Clear Bra) that actually stops rocks and physical road debris from hitting your paint.
2.
Precision takes time. Depending on the package, a professional installation typically takes 1 to 3 days. We utilize mobile canopy systems or your home garage to ensure a debris-free environment for the curing process.
3.
When installed correctly by LV Fresh Details, the film is virtually invisible. We use precision-cut templates and wrap the edges of the panels whenever possible so you see the paint’s gloss, not the film’s edges.
4.
Yes, but we recommend hand-washing to maximize longevity. While AG 1051 and PPF are much more durable than factory paint, avoiding automated "brush" washes will ensure your 10-year protection stays crystal clear for the full decade.
5.
New vehicles often arrive with "factory defects" and zero protection. Dealerships rarely apply high-grade shields. Protecting it now prevents the inevitable rock chips and UV oxidation that start the moment you drive off the lot.
6.
No. We use only premium, UV-stable films and resins (like AG 1051) that are engineered to remain optically clear. Our products are backed by warranties against yellowing, cracking, or peeling.
7.
We are fully self-sufficient and utilize professional mobile setups. We prefer working in a garage or under our mobile canopy to control temperatures and prevent dust contamination, ensuring shop-quality results at your location.
